• Usually Ships 4 to 7 Business Days
EMX

EMX LRS-DB-100 Sensor - Direct Burial with 100ft Lead (LRS-DB-100)

SKU:
LRS-DB-100
  • Usually Ships 4 to 7 Business Days
MSRP: $221.75
$201.59
(You save $20.16 )
Adding to cart… The item has been added
  • Shipping Cost? For the cost of shipping your item please add the item into the shopping cart. Once the part is in the cart fill out address information in the cart under the Shipping area in the Summary section. Our system will then calculate the shipping fee based on your location and the weight of the product. This is all done before you are asked to provide payment information.
The EMX LRS-DB-100 Direct Burial Sensor uses the Earth's magnetic field to detect vehicles and signal the control panel. Designed specifically for use with EMX LRS-C1 Vehicle Detector Control Unit. When a ferrous object, like a car, disrupts the magnetic field being measured by the sensor, the device signals the control panel to open or close the gate or door. The sensor is suitable for above or below-grade installations and can be buried in either a vertical or horizontal orientation.

The compact sensor size allows for economical installation options. A single small saw cut is all that is need for below-grade installations, saving time and money. The sensor is designed to be sensitive, yet selective, reducing false alarms and only signaling when a vehicle is present. The sensor may be programmed to only activate when the vehicle triggering the sensor comes to a complete stop, further reducing false activations.

The EMX LRS-DB-100 Single Cut Direct Burial Magnetoresistive sensor was formerly known as the CarSense CS303-DB-100 that worked with the CarSense CS303-C-1 (now known as the LRS-C1 Control Unit).

Features:

  • Easy, low cost installation
  • Small size of the detector allow for easy installation in pavement
  • Rugged sensor is also suitable for above grade installations
  • Direct Burial Sensor w/100 ft lead wire
  • Designed specifically for use with EMX LRS-C1 Vehicle Detector Control Unit
Loopless Magnetoresistive Vehicle Detector
Model Operating Range Output Power Channel Housing Rating Connection Detect-on-Stopâ„¢ ULTRAMETERâ„¢ Sensitivity Display Installation Detection Material Mounting Detection Mode Features
Control Unit (required to program sensors)
LRS-C1 EMX CS303-C-1 — Relay and discrete 12-30 VDC
24 VAC
Single ABS IP30 11 position screw terminal Yes Yes In operator — Above ground Presence and motion Pulse on entry/exit
Sensor Options
LRS-FP EMX CS303-FP 5 ft. radius (1.5m)
10 ft. dia. (3m)
Discrete 12-30 VDC Single Polyamide IP69K 5 wire Yes — Single saw cut Ferrous metal Below ground Presence and motion Retains programmed settings
LRS-DB EMX CS303-DB 5 ft. radius (1.5m)
10 ft. dia. (3m)
Discrete 12-30 VDC Single PVC IP69K 5 wire Yes — Core drill, Clamp Ferrous metal Above or Below ground Presence and motion Retains programmed settings
Accessory Unit
LRS-LC EMX CS303-L 20 ft. (6m) or more with use of multiple FP or DB Dual relay 12-30 VDC
24 VAC
Dual ABS IP30 11-pin Yes — In operator — Above ground Presence and motion Provides extended detection, A/B logic and more

lrs-2.pdf

lrs.pdf