EMX VMD202-R Tuning/Adjustment Remote Control

The VMD202-R handheld remote is available at North Shore Commercial Door! Use this remote in conjunction with VMD202 vehicle motion detectors to easily adjust sensitivity levels on the probe. The VMD202-R  plugs into the harness on the vehicle motion detector to allow for easy fine-tuning of the buried VMD. Sensitivity is set based on your traffic patterns and the system supports 10 sensitivity settings. These range from position 0, which is the lowest sensitivity, to the highest sensitivity at position 9. Note that sensitivity is a function of speed and mass, so the slower a vehicle moves, the closer the vehicle must pass the probe to trigger the detector. After determining the best sensitivity settings for your situation, you can make the appropriate adjustments and remove the remote to reduce power consumption and prevent unwanted changes.

 North Shore Commercial Door prides itself on quality customer service and providing the best and most complete product information to its customers. Contact us at 800-783-6112, or email support@northshorecommercialdoor.com with any questions.

COMPATIBLE WITH:

• EMX VMD202-50 Vehicle Motion Detector 50'
• EMX VMD202-100 Vehicle Motion Detector 100'
• EMX VMD202-150 Vehicle Motion Detector 150-ft.
• EMX VMD202-200 Vehicle Motion Detector 200-ft.
• EMX VMD202-250 Vehicle Motion Detector Wand 250-ft.
• EMX VMD202-350 Vehicle Motion Detector 350-ft.