Eliminates garage door opener arm hook-up bracket.
Top strut application.
Top quality galvanized steel.
Designed for reinforced mounting of electric operators.
Will span the top section of insulated sandwich type doors.
21" section widths.
Top bracket is formed to allow for across the top strut application.
Previously known as RIB-21-NL
LENGTH: 20-3/4 inches
WIDTH: 2-7/8 inches
DEPTH: 1-1/8 inches
END WIDTH: 2-1/4 inches
MOUNTING HOLE TO MOUNTING HOLE: 1-7/8 inches
VERTICAL HOLES: 2-1/4 inches
For more product & how-to videos subscribe to our YouTube channel:
QUESTION: my I have the width and depth dims? by James B 7/6/2016
QUESTION: Will this work on a Pella Garage Door? by john82009 j 2/14/2016
ANSWER: I see no reason why it wouldn't. It's pretty universal. I used two of them on Ideal garage doors. I'm guess your garage door panels are a standard size. Kevin by Kevin A a
QUESTION: Is Garage door's reinforcement bracket only for places suitable windy locations? I live in Atlanta, GA. Or is it mainly for dividing the weight on the door? by None N 11/16/2015
STAFF ANSWER: mainly for dividing the weight on the door by Taylor M a
QUESTION: I have a Clopay door with hurricane reinforcement struts. The previous owner installed a garage door opener without a door opener reinforcement bracket. Will this bracket fit with the hurricane reinforcement struts in place? by Doug V 1/29/2015
ANSWER: My door has the basic reinforment on each panel. I was able to mount the bottom of this bracket on an existing screw used for the hinge, and I also mounted the top on an existing screw on the top reinforcement. Not sure how your huricane reinforcements are run. If the length matches, you probably can install this on top or underneath them. Hope this helps! by Robert E a
STAFF ANSWER: You need to measure the length of the panel .This one is for panels 21" long by Matthew O a