- Works with doors that are 1-3/8" thick and doors that are 2" thick. Extremely easy and fast to install.
Action Industries
EZ ZIP Garage Door Bottom Push-In Weather Seal Kit
- Works with doors that are 1-3/8" thick and doors that are 2" thick. Extremely easy and fast to install.
- atc-product:
- A13XT
- atc-product:
- A2064
- atc-product:
- WD-1-KIT
- atc-product:
- ULTRA-KIT
- atc-product:
- A1700-V9-A
- atc-product:
- A1700-V18-A
- atc-product:
- GIANT-WEATHERSEAL-KIT
- atc-product:
- P1364
Seal the bottom of your garage door with the cost-effective Coiled Push-in 1-Piece Bottom Seal from North Shore Commercial Door. Most weather seals on the market require separate installation of retainers to hold them in place. These seals offer a two-in-one plastic retainer and weather seal design that makes installation simple. This innovative design from North Shore Commercial Door is available in 2 inch and 1-3/8 inch seal sizes and in a variety of lengths to fit virtually any door.
1-Piece bottom seal has two sections: Rigid and Flex. Rigid and Flex sections work together to act as a two-in-one retainer and weather seal. The rigid portion lays flat against the bottom of a garage door, and mounts with fasteners to act as the bottom seal retainer. The flex section bends into a U-Shape and the push-in barb is pushed into the rigid retainer. Once installed, this U-Shaped bottom seal will keep out harmful weather, pests, dirt, dust, and more.
Each rigid section is pre-notched for screws to make installation as straightforward as possible. Simply uncoil your 1-piece seal from North Shore Commercial Door and start mounting with the included self-tapping fasteners. Choose coil lengths ranging from 10 ft. to 100 ft.
Kits include:
- Push-in Coiled Bottom Seal
- #8-18 x 3/4 in. Hex Head Tek Screws
- Instruction Sheet
- 109-0414 – 1-3/8 INCHES - 10 FOOT KIT
- 109-0415 – 1-3/8 INCHES - 20 FOOT KIT
- 107-0132 – 1-3/8 INCHES - 100 FOOT KIT
- 109-0418 – 2 INCHES - 10 FOOT KIT
- 109-0419 – 2 INCHES - 20 FOOT KIT
- 107-0133 – 2 INCHES - 100 FOOT KIT
- Patented one-piece push-in bottom seal
- Innovative design streamlines installation and saves money
- Two-in-one retainer and weather seal solution
- Removes the need for a weather seal retainer prior to weather seal installation
- Pre-cut with grooves for fasteners
- Rigid section mounts to the bottom of the door with included fasteners
- Flexible section bends into a U-Shape and snaps into the rigid retainer section
- Push-in barb retainer design makes assembly easy
- Keeps out harmful weather to protect the inside of your garage
- Also helps keep out dirt, pests, dust, leaves, and other debris
- Available coil lengths: 10 ft and 20 ft.
- 1-3/8 Seal Dimensions:
- Rigid: 1.3 inch length x 0.060 thick wall
- Flex: 3 inch length x 0.040 inch thick wall
- 2 inch Seal Dimensions:
- Rigid: 1.9 inch length x 0.60 inch thick wall
- Flex: 3.75 inch length x .040 inch thick wall