BD Loops

BD Loops BD-LS Loop Shield Sealant

MSRP: $23.48
(You save $2.13 )
Adding to cart… The item has been added
  • Shipping Cost? For the cost of shipping your item please add the item into the shopping cart. Once the part is in the cart fill out address information in the cart under the Shipping area in the Summary section. Our system will then calculate the shipping fee based on your location and the weight of the product. This is all done before you are asked to provide payment information.
BD Loop Shield encloses, insulates, and protects inductance loops for gate, door, and parking applications. BD-LS is a moisture curing sealant that cures faster and is more versatile than common Polyurethane sealants. This new and innovative loop sealing solution is available for the first time from North Shore Commercial Door. Unlike Polyurethane, it won’t shrink or bubble when exposed to water, is solvent free with low odor, can be applied to wet surfaces, and is easier to clean up. Extremely resistant to UV light and can be easily painted to blend in with any installation. Each tube of BD-LS comes with a flat sealant tip that makes it easy to seal gaps in a single pass. Applying BD-LS to seal a loop requires no additional mixing or heating of the compound. Product Highlights:
  • Durable, versatile compound can be used indoors or on exteriors with extreme climates
  • Comes in 30 fl. oz. rigid plastic tubes
  • One year shelf life
  • Available in multiple colors (Gray and Black)
  • Long-term durability for interior and exterior use
  • Low VOC, less odor than Polyurethane sealants
  • Can be applied to wet or damp surfaces
  • Each tube comes with a flat sealant tip that allows loops to be sealed in one pass
  • Two Color Options: BD-LS-BLACK & BD-LS-GRAY
  • VOC & Prop 65 Compliant
  • Quick Cure: 45 minute skin time
  • Adheres to a wide range of materials
  • Doesn’t bubble when exposed to water
  • Easier to cleanup that Polyurethane sealants
  • Solvent free
  • Resistant to UV light, won’t yellow or suntan
Product Specs:
  • Viscosity (ASI Test Method): 40,000 cps (Spindle 7, 4rpm)
  • Skin Formation Time (ASI Test Method): 45 minutes (70°F, 50% RH)
  • Density (ASTM D1475): 12.5 lbs./gal
  • Hardness (ASTM C661): 25 (Shore A)
  • Modulus 100% (ASTM D412): 0.50 MPa
  • Tensile Strength (ASTM D412): 1.33 MPa
  • Elongation at Break (ASTM D412): 300%
  • Lap Shear (ASTM D412): N/A
  • Gun Grade (ASI Test Method): Self-Leveling (low viscosity)
  • QUV Testing (ASTM G26): Pass (4,000 hrs)
  • Service Temperature (ASI Test Method): -50°f to 220°F
  • Cure in Depth After 7 Days (ASI Test Method): 11mm (70°F, 50% RH)
  • BD-LS_TDS.pdf