Are you in an industry that requires hygienic activation or encounters high traffic volume? North Shore Commercial Door wants to help you reduce touchpoints with the BEA 10MS31R Wave To Open 6 Inch Round Actuator Plate kit. This microwave touchless actuator detects moving objects such as hands, carts, or wheelchairs from as far as 24 inches away. Able to be mounted on full energy swing doors, low energy swing doors, and industrial doors this sensor has nearly unlimited applications. The built-in relay hold time of 0.5 to 30 seconds allows this Magic Switch sensor to be ANSI 156.10 Knowing Act Compliant. A standard commonly found at hospitals, pharmacies, clean rooms, and food service facilities.
The 10MS31R Wave To Open actuator kit with a 6-inch round actuator can be surface or flush-mounted. To surface mount the 10MS31R you will need to use mounting box model 10BOX6RNDSM. Flush mount applications only require a standard single-rang electrical box for wiring. While the actuator kit is able to replace old push plates, there are two components needed to ensure proper functionality. For retrofit applications the 10MS31R requires the 10RD900 900MHz Receiver and 10TD900TR 900MHz Retrofit Transmitter.
Technology: Microwave Doppler Radar
Radiated Frequency: 24.125 GHz
Radiated Power Density: < 5mW/cm squared
Direction Mode: Motion (bidirectional)
Detection Range: 4-24 Inches (adjustable)
Output: Relay with switch-over contact (voltage-free)