For DIY garage door weather seal that will seal gaps at the top and sides of your 12-ft. by 14-ft. garage door, choose Action Industries 12-ft. by 14-ft. Flex Seal weather seal kits from North Shore Commercial Door. These complete Action Industries Flex Seal kits include pre-made retainers, pre-installed brush seals and simple snap-in-place fasteners. No expensive installation tools or time-consuming drilling are necessary.
Action Industries' advanced Flex Seal flexible polypropylene brush filaments are densely configured to stop even minute dust particles from entering your residential garage or business. These weather seals close gaps at the header (top) and jambs (side) to keep out dirt, debris, rain, and insects and other pests. They block hot and cold drafts, too. Flex Brush bristles will stay stiff when it's wet, and not freeze in below-zero temperatures.
Each 12-ft. by 14-ft. garage door brush seal kit contains five 4-ft. standard retainers, four 5-ft. standard retainers, 40 ft. of pre-installed brush seal filaments and 32 self-tapping fasteners. Order brush seal lengths to fit the gaps on door tops and bottoms. Choose 1-in., 1 1/2-in., 2-in. or 3-in. lengths.
Retainers are available in two profile styles: angled (45 degrees) or straight (90 degrees). Straight retainers hold the flexible brush at a 90-degree angle to position the bottom of the brush flush with the exterior of the door. The straight holder profile is ideal for rolling steel, roll up and corrugated garage doors that might have more irregular surfaces at the door jambs and header.
The angled (45 degrees) retainer profile pushes the brush seal against the door at a 45-degree angle, and is ideal for sectional and overhead residential or commercial garage doors.
This Action Industries garage door brush seal kit has standard retainers that fit #4 channels. If you have #2.5 channels, see our Action Industries Slim-Line garage door brush seal kits. Also shop our garage door bottom weather seals.
5x 4 ft. standard aluminum retainers pre-punched with holes
4x 5 ft. standard aluminum retainers pre-punched with holes
40 ft. of flex brush weather seal pre-installed in retainers
32 self-tapping fasteners
Fits any 12-ft. by 14-ft. commercial or residential garage door
Seals gaps at header (top) and jambs (side)
Blocks entry of costly contaminants, pests, drafts
Standard brush seal retainer fit #4 channels
Kit includes pre-made retainer, brush seal and fasteners
No drilling or extra assembly required
Flex Brush bristles pre-installed on retainers
Pre-punched aluminum retainers arrive in sections
Five 4-ft. standard retainer sections + four 5-ft. sections
Choose 1 in. to 2 in. bristle length
Choose retainer style: straight (90 degrees) or angled (45 degrees)