• Usually Ships Following Business Day
EMX

EMX WEL-200K Wireless Edge Link Kit (1 TRANSMITTER & 1 RECEIVER)

SKU:
WEL-200K
  • Usually Ships Following Business Day
MSRP: $237.62
$216.02
(You save $21.60 )
Adding to cart… The item has been added
  • Shipping Cost? For the cost of shipping your item please add the item into the shopping cart. Once the part is in the cart fill out address information in the cart under the Shipping area in the Summary section. Our system will then calculate the shipping fee based on your location and the weight of the product. This is all done before you are asked to provide payment information.

Get the WEL-200 Wireless Edge Link System by EMX Industries from North Shore Commercial Door. The WEL-200 provides a complete wireless solution for interfacing sensing edges with gate and door operators. It eliminates the need to wire between the safety edge and the operator control box while ensuring compliance with UL325 monitoring standards. EMX's WEL-200 has an operating range of up to 200 ft. between the transmitter and the receiver. Connect the receiver with up to four transmitters with separate relay and pulse outputs for open and close edge functionality. The WEL-200 system is housed in rugged, watertight, NEMA 4X enclosures.

The WEL-200T transmitter is compatible with 8.2K and 10K monitored safety edges. The WEL-200T transmitters will operate for up to two years on two AA lithium batteries.

The WEL-200R receiver is easy to install and maintain with enhanced diagnostic features. Feedback is provided for all fault modes, including edge open and short conditions, low battery, and failed transmitters. The WEL-200R receiver supports all common monitoring methods, including normally closed (NC), resistive termination (10K), and pulse output.

The WEL-200K Wireless Edge Link Kit contains one (1) WEL-200T transmitter and one (1) WEL-200R receiver.

PLEASE NOTE: THE CONTROL BOARD HAS BEEN UPDATED IN AUGUST OF 2020. NEWER UNITS HAVE A RED CONTROL BOARD AND ARE NOT COMPATIBLE WITH UNITS USING A GREEN BOARD

Product Highlights:

  • Item Number: WEL-200K
  • Wireless Edge Link Kit:
    • One (1) WEL-200T Wireless Edge Link Transmitter
    • One (1) WEL-200R Wireless Edge Link Receiver
  • Interface sensing edges with gate and door operators
  • Eliminates the need to wire between the safety edge and operator control box
  • Ensures compliance with UL325 monitoring standards
  • Operating range of up to 200 ft. between transmitter and receiver
  • The receiver can be connected with up to four transmitters with separate relay and pulse outputs for open and close edge functionality
  • Housed in rugged, watertight, NEMA 4X enclosures
  • The transmitter is compatible with 8.2K and 10K monitored safety edges
  • Transmitter operates for up to two years on two AA lithium batteries
  • The receiver is easy to install and maintain with enhanced diagnostic features
  • Receiver feedback is provided for all fault modes including edge open and short conditions, low battery, and failed transmitters
  • The receiver supports all common monitoring methods including normally closed (NC), resistive termination (10K), and pulse output

WEL-200T Wireless Edge Link Transmitter Technical Information:

  • Operating Range: Up to 200 ft. (line of sight)
  • Response Time: 100ms
  • Power/Fault Indicator: Green transmit/status LED
  • Channel Status Indicator: N/A
  • Channel Mode Selection Switch: N/A
  • Outputs: N/A
  • Resistive Termination: N/A
  • Power Protection: Thermal Fuse
  • Environmental Rating: NEMA 4X
  • Power Supply:
    • 3-3.6 VDC (2xAA batteries)
    • (ANSI 15-LF, IEC-FR14505 (FR6))
  • Battery Life: 2 years at 25ËšC
  • Current Draw: N/A
  • Operating Temperature: -40Ëš ...60ËšC (-40Ëš ...140ËšF)
  • Dimensions (L x W x H): 180mm (7.0") x 32mm (1.3") x 67mm (2.6")
  • Weight: 170g (6 oz.)
  • Connections: 2 terminals (18-26AWG)

WEL-200R Wireless Edge Link Receiver Technical Information:

  • Operating Range: Up to 200 ft. (line of sight)
  • Response Time: 100ms
  • Power/Fault Indicator:
    • Red power LED
    • Green channel LED
  • Channel Status Indicator: Green LED
  • Channel Mode Selection Switch: Assign each channel to the OPEN/CLOSE function
  • Outputs:
    • OPEN relay: Form C contacts (NO, COM, NC)
    • CLOSE relay: Form C contacts (NO, COM, NC)
    • OPEN pulsed: Open collector transistor output (optoisolated)
    • CLOSE pulsed: Open collector transistor output (optoisolated)
  • Resistive Termination: 10K ohm across NO contact (jumper selectable)
  • Power Protection: Thermal Fuse, MOV
  • Environmental Rating: NEMA 4X
  • Power Supply: 12-24 VAC/VDC
  • Battery Life: N/A
  • Current Draw: 50 mA
  • Operating Temperature: -40Ëš ...60ËšC (-40Ëš ...140ËšF)
  • Dimensions (L x W x H): 140mm (5.5") x 34mm (1.3") x 90mm (3.5")
  • Weight: 200g (7 oz.)
  • Connections: 12 terminals (18-26AWG)
Wireless Edge Link
Model Operating Range Output Power Monitoring Method Housing Rating Connection Operating Frequency Features

WEL-200K

Up to 200 ft. (61m) Dual relay
Dual pulse
TX - 3-3.6 VDC
(2, AA lithium batteries)
RX - 12-24 VDC/AC
4 wire pulse
NC
10K
ABS NEMA 4X TX - 2 terminals (connect up to 4 TX)
RX - 12 terminals
915 MHz UL 325 monitored UL - Underwriters Laboratories Logo

WEL-200-BOARD-UPGRADE-BULLETIN.pdf

WEL-200-CUT.pdf

MANUAL.WEL-200.pdf