EMX LP D-TEK Low Power “Fail Safe” Vehicle Loop Detector


View Similar / Alternative Item | |
![]() | BEA LZR-H100 Wireless Loop Laser Scanner For Gate & Barrier Applications $1,550.44$1,292.03 |
![]() |
Product Description
The EMX LP D-TEK Low Power Fail-Safe Vehicle Loop Detector for gates and garage door openers consumes little power and conserves a lot of energy. Designed by EMX Industries, the LP D-TEK loop detector is perfect for any application where you need to detect a vehicle but don't want to use up a lot of power to do so. Solar applications are well accommodated by the low 9 mA draw, and it can also be used for operators requiring a lot of accessories that draw their power from the same source. With such a low current, costs are lowered by virtue of smaller solar panels being required. The EMX LP D-TEK Low Power Fail-Safe Vehicle Loop Detector can operate in either fail safe or fail secure mode. Other features:
- Surge protection
- Loop isolation transformer
- Built-in loop conditioner
- Aluminum RF shield housing
- Loop diagnostics
- Frequency counter
- Gold-plated control contacts
- 2 relays
Model | Output | Power | Channel | Housing | Connection | Detect-on-Stop™ | ULTRAMETER™ Sensitivity Display | Detection Mode | Features |
---|---|---|---|---|---|---|---|---|---|
MVP D-TEK ![]() |
Dual Relay | Multi-voltage 12 VDC - 240 VAC |
Single | Aluminum | 11-pin | — | — | Presence and motion | Pulse on entry/exit |
ULT-MVP ![]() |
Dual Relay | Multi-voltage 12 VDC - 240 VAC |
Single | ABS | 11-pin | Yes | Yes | Presence and motion | Pulse on entry/exit |
ULT-MVP-2 ![]() |
Dual Relay | Multi-voltage 12 VDC - 240 VAC |
Dual | ABS | 11-pin | Yes | Yes | Presence and motion | Pulse on entry A/B logic |
ULT-DIN ![]() |
Dual Relay | 12-24 VDC 24 VAC |
Single | ABS | DIN rail screw terminal | Yes | Yes | Presence and motion | Pulse on entry |
ULT-PLG ![]() |
Discrete | 12-24 VDC | Single | ABS | 10-pin female | Yes | Yes | Presence and motion | Pulse on entry/exit |
ULTRA V-2 ![]() |
Discrete | 12-24 VDC | Single | ABS | 10-pin female | — | Yes | Presence and motion | Pulse on entry/exit |
ULTRA II ![]() |
Relay | 12-30 VDS 24 VAC |
Single | ABS | 7 position screw terminal | — | Yes | Presence and motion | Pulse on entry |
LP D-TEK ![]() |
Dual relay | 12-24 VDC/AC | Single | Aluminum | 11-pin | — | — | Presence and motion | Pulse on entry/exity |
Product Videos
For more product & how-to videos subscribe to our YouTube channel:
Related Products
Ask a Question
COMMENT: Replacement part for an R3 detector which did not last very long. by Clyde B 5/27/2016
COMMENT: Replace GTO discontinued loop detector for my gate by Paul M 3/24/2016
QUESTION: Do you sell just the wire harness for this product? by Ryan B 7/25/2014
STAFF ANSWER: HAR11 is the part number by Matthew O a
Product Manual