This weather-tight Gateway Industrial vinyl truck dock seal from North Shore Commercial Door is built to fit industrial truck docks that are 48 inches high with an 8-foot by 8-foot opening with a level approach and 10-inch projection. Order them for medium to heavy industrial or commercial applications. Truck dock seals by Gateway Industrial Products will absorb over 80 percent of truck impact and shock to protect your dock and building while keeping out debris.
The beveled side pads on this Gateway dock seal with 40-ounce 24-inch vinyl head pad creates a tight seal by closing the door opening down to 7' 4" by 7' 6" against the vehicle. Seamless construction equals fewer stress points from compression. The yellow safety guide stripes are 3" wide and 24" high for great visibility. Anchor bolts with heavy-duty steel angles are protected with 3" of rubber to prevent damage. This building dock seal is available with optional side pleats and full pleat stripes.
IMPORTANT NOTE ABOUT LEAD TIME
Lead time varies and to be determined upon placement of your order.
DOCK SEAL WEAR PLEATS & FULL PLEAT STRIPE OPTIONS - PRICE VARIES
Dock seal wear pleats in 40 oz. vinyl w/8" exposure and a full pleat stripe in yellow are available.
The displayed price is for 1910808401081212 Dock Seal ONLY. The below options can be added to your order by selecting the appropriate drop downs:
Dock seal wear pleats in 40 oz. vinyl w/8" exposure
A full pleat stripe in yellow
Add dock seal wear pleats & a full pleat stripe in yellow
To place your order, please select one of the following options from the drop-down menu above:
1910808401081212 Dock Seal NO PLEATS
1910808401081212-WP Dock Seal WEAR PLEATS
1910808401081212-FPS Dock Seal FULL PLEAT STRIPE
1910808401081212-WP-FPS Dock Seal WEAR PLEATS/FULL PLEAT STRIPES
For medium to heavy industrial/commercial uses
For 8' x 8' (48" high) dock openings with a level approach, 10" projection
24" 40 oz. black vinyl head pad
8 ½" bevel
3" x 24" yellow safety guide stripes
Forms a tight seal by compressing down to 7'4" x 7'6" against the truck
Forms positive, weather-tight seal
Manufactured under 1,500 lb.+ pressure to absorb 80% of truck impact, shock
Seamless construction = fewer stress points from compression
Steel angle anchor bolts with 3" rubber coating
Optional dock seal wear pleats, full pleat stripes
For more product & how-to videos subscribe to our YouTube channel: