Genie

PowerMax 1200 140V DC Residential Screw Drive Operator (Model 4062-TKV) by Genie 37282R

This item is discontinued. Please view this replacement item:

MSRP: $342.56
$285.47
(You save $57.09 )
  • Shipping Cost? For the cost of shipping your item please add the item into the shopping cart. Once the part is in the cart fill out address information in the cart under the Shipping area in the Summary section. Our system will then calculate the shipping fee based on your location and the weight of the product. This is all done before you are asked to provide payment information.

The PowerMax® 1200 140V DC Residential Screw Drive Garage Door Opener (Model 4062-TKV) by Genie is now available to order from North Shore Commercial Door. Model 4062-TKV offers intelligent design for the homeowner that wants maximum power and speed with superior design and the ultimate in conveniences to fit their busy lifestyle. The 1 HPc Power Plus 140 Volt DC motor delivers maximum lifting force to operate almost any residential garage door up to 7' high directly from the box (or up to 8' high with the Genie 8' Screw Drive Extension Kit - Item #37303R). Maximum opening speed of 12.0 inches per second to provide the ultimate in fast performance.

GenieSense™ Monitoring and Diagnostic Technology delivers the power needed for every movement of the garage door and continuously monitors the operation of the door, stopping operation when significant changes occur. GenieSense™ minimizes noise, wear and tear on the door, and improves overall safety. Intellicode® Access Security System provides superior encryption technology (also known as rolling codes) that prevents piracy of the radio signal that opens your garage door by continually seeking a new code from billions of combinations. The door opener responds to each new code only once. If an access code is copied from a working system and tried again, it will not control the door opener. Works with ALL HomeLink® & Car2U® systems regardless of when those systems were made. No additional external repeater box or compatibility bridge needed. Also compatible with Aladdin Connect™. Auto Seek Dual Frequency system will automatically seek either 315 or 390 MHz frequency produced by a remote, helping to ensure the opener will respond regardless of nearby frequency interference.

Safe-T-Beam® Non-Contact Reversing System puts an invisible beam across the door opening. If anything passes through the beam, the door stops and reverses to the fully open position. LED indicator lights on the powerhead and on the STBs provide self-diagnostics in the event of an operational problem. Safe-T-Beam® monitored by Door Detect™ Monitoring System to ensure it is functioning properly and that a closing door will automatically stop/reverse if a problem is detected. Safe-T-Reverse® Contact Reversing System automatically stops and reverses the closing door within two seconds of contact with an object. In the event of a power failure or other emergency, the Manual Emergency Release will manually release the door from the door opener to allow manual opening and closing of the door. Remote controls come pre-programmed from the factory. No additional steps are required to activate the door using the remote.

Easily set limits and program new remotes with SmartSet™ Electronic Programming. Wall console to operate the door opener from inside the garage. Features an indicator light with Open/Close, Sure-Lock™, and independent light control buttons. Integrated motion detector provides convenience and security to the two (2) 100-Watt bulb lighting system. Turns ON when the door is activated and automatically turns OFF 4 minutes later. Genie Battery Backup (BBU) is available on some models. Provides power to the opener in the event of a power failure. PLEASE NOTE: Genie Battery Backup will only operate after operator installation is completed and Travel Limits have been set. Assembled in the U.S.A. with a Limited Lifetime Motor & Screw Drive Warranty (see manual for limitations and details).

WHAT'S INCLUDED

  • One (1) Genie GSTB-BX Safety Beam Set (Item #37220R)
  • Two (2) Genie G3T-BX Intellicode 3-Button Garage Door Remotes (Item #G3T-BX)
  • One (1) Genie GBWC2-BX Series II Wall Console (Item #38066R-39165R)
  • One (1) Genie GWKP Wireless Keypad (Item #35282R)

PRODUCT HIGHLIGHTS

  • Item Number: GENIE-37282R
  • PowerMax® 1200 140V DC Residential Screw Drive Garage Door Opener (Model 4062-TKV) by Genie
  • 1 HPc Power Plus 140 Volt DC Motor: Delivers maximum lifting force to operate almost any residential garage door up to 7' high directly from the box (or up to 8' high with the Genie 8' Screw Drive Extension Kit - Item #37303R).
  • Maximum Opening Speed: 12.0 inches per second to provide the ultimate in fast performance.
  • GenieSense™ Monitoring and Diagnostic Technology: Provides safety by continuously monitoring the operation of the door, stopping the operation to alert you when significate changes occur.
  • Intellicode® Security: Superior encryption technology (also known as rolling codes) that prevents piracy of the radio signal that opens your garage door by continually seeking a new code from billions of combinations. The door opener responds to each new code only once. If an access code is copied from a working system and tried again, it will not control the door opener.
  • HomeLink® & Car2U® Compatible: Works with ALL HomeLink and Car2U systems regardless of when those systems were made. No additional external repeater box or compatibility bridge needed.
  • Compatible with Aladdin Connect™
  • Auto Seek Dual Frequency System: Automatically seeks either 315 or 390 MHz frequency produced by a remote, helping to ensure the opener will respond regardless of nearby frequency interference.
  • Safe-T-Beam® (STB) Non-Contact Reversing System: Puts an invisible beam across the door opening. If anything passes through the beam, the door stops and reverses to the fully open position. LED indicator lights on the powerhead and on the STBs provide self-diagnostics in the event of an operational problem.
  • Door Detect™ Monitoring System: Monitors the Safe-T-Beam®to ensure it is functioning properly and that a closing door will automatically stop/reverse if a problem is detected.
  • Safe-T-Reverse® Contact Reversing System: Closing door automatically stops and reverses within two seconds of contact with an object.
  • Manual Emergency Release: In the event of a power failure or other emergency, the Manual Emergency Release will manually release the door from the door opener to allow manual opening and closing of the door.
  • SmartSet® Electronic Programming: Easily adjust the programming to set limits and program new remotes.
  • Pre-Programmed Remotes: The remote included with this operator comes from the factory, pre-programmed for quick and easy installation. No additional steps are required to activate the door using the remote.
  • Wall Console (Selected Models): Operates door opener from inside the garage. Features an indicator light with Open/Close, Sure-Lock, and independent light control buttons.
  • Automatic Lighting System: Double bulb lighting system with integrated motion detector provides convenience and security to the two (2) 100-Watt bulb lighting system. Turns ON when the door is activated and automatically turns OFF 4 minutes later for safer evening exits and entries.
  • Genie Battery Backup (BBU): Available on some models. Provides power to the opener in the event of a power failure. PLEASE NOTE: Genie Battery Backup will only operate after operator installation is completed and Travel Limits have been set.

GENIE-4062-TKV-BINDER.pdf