• Usually Ships 4 to 7 Business Days
LiftMaster

LIFTMASTER GATE OPERATOR CSW24U w/LMRRU Photo Eye (SWGO 24VDC W/BATTERY BACKUP)

SKU:
CSW24U
  • Usually Ships 4 to 7 Business Days
MSRP: $3,033.03
$2,757.30
(You save $275.73 )
Adding to cart… The item has been added
  • Shipping Cost? For the cost of shipping your item please add the item into the shopping cart. Once the part is in the cart fill out address information in the cart under the Shipping area in the Summary section. Our system will then calculate the shipping fee based on your location and the weight of the product. This is all done before you are asked to provide payment information.

For the most demanding swing gate environments, get the LiftMaster CSW24U 24VDC High-Traffic Commercial Swing Gate Operator from North Shore Commercial Door. Engineered for more than a million cycles in high-traffic, heavy-duty, demanding applications. Rated for gates up to 18 feet in length and weighing up to 1,200 pounds. The CSW24U is ideal for large gated communities, residential developments, and commercial complexes. The P3 Motor® 24VDC continuous-duty motor is designed by LiftMaster as a purpose built high-cycle high-temperature continuous duty motor to meet the exact requirements needed to open and close your gate. 

FEATURES

The heavy-duty commercial gear-driven transmission provides unsurpassed reliability. Soft start/stop and mid-travel reversal extend operator and hardware life in high-cycle and heavy-gate applications. Surge suppression provides industrial surge and lightning protection against strikes up to 50-feet away. Fire department compliance allows the gate to auto-open upon loss of AC power or battery depletion. Wireless dual-gate communication eliminates expensive conduit costs and avoids unsightly driveway scars. Simple-to-use emergency release handle allows the gate to be operated manually and maintain limit position once re-engaged. LED diagnostic display simplifies installation and troubleshooting. Programmable auxiliary relays allow you to easily add additional features, such as warning lights/alarms. Bi-part delay monitors and adjusts speed and position of each wing to ensure primary gate closes last. Synchronized close simultaneously closes gates. Pre-motion warning alarm activates onboard alarm three seconds prior to gate motion. HomeLink® compatible with Version 4 and higher. Security+ 2.0® onboard radio receiver controls up to 50 remote controls. Confidently know what's going on at home with MyQ® Technology. MyQ® Lets you monitor and control your Gate Operator and home lighting from anywhere (when paired with the LiftMaster Internet Gateway). Receive email or text alerts so you always know the status of your gate and lighting. Get the MyQ® mobile app for free - no annual activation fee required. Requires 828LM MyQ® Internet Gateway to connect to MyQ® Smartphone App.

Ultra-Reliable Solar Power System can qualify homeowners for a Federal Tax credit equal to 30% of the installed cost of their LiftMaster Solar Powered Gate Operator System. Ultra-efficient Power Management System and Battery Backup feature will allow you to get on and off your property even when the power's out. Battery Backup secures and safeguards your property by providing up to 146* cycles or 24 days of standby power when the power is down. Never wait for the gate and safely enter your property with Security+2.0™ -patented multi-frequency secure radio technology which virtually eliminates interference and offers 2X the range of standard remotes. Quickly secure your gate and prevent unauthorized access to your garage with the Quick-Close/Anti-Tailgate features. The Quick-Close feature closes the gate immediately after a vehicle pulls off the interrupt loop. The Anti-Tailgate feature pauses the gate when closing if a vehicle pulls onto the interrupt loop or breaks the photo beam. Once the vehicle backs up, the gate will continue to close. Attach additional safety reversing devices with provided monitored safety inputs that come standard with the CSW24U. Includes 6 monitored safety inputs to cover all entrapment points and each entrapment point should be protected with its own device. Tested to UL/cUL listed standards to meet the most stringent industry guidelines including the NEW 2016 UL 325 Gate Guidelines.

WHAT YOU NEED TO KNOW

  • Two monitored safety entrapment protection devices must be installed at each entrapment point, including:
    • The inherent reversing system built into each LiftMaster Gate Operator
    • LiftMaster Monitored Photo Eyes and/or Edge Sensors**
  • Gate operators will now monitor for fault conditions of external entrapment protection devices
  • New regulations go into effect January 2016

*Basic setup with remote controls programmed. Does not include added accessory power draw. LiftMaster low power draw accessories recommended to extend cycles and standby time on battery backup.

**Only LiftMaster Monitored Photo Eyes or Edge Sensors may be used with this operator to meet the 2016 UL 325 Standard

WHAT'S INCLUDED

TECHNICAL INFORMATION

  • Power: 120V/230V Single Phase
  • Accessory Power:
    • 24VDC 500mA Output
    • Switched and Unswitched Power
  • Monitored Safety Inputs:
    • 3 Main Board
    • 3 Expansion Board
  • Temperature Specifications:
    • -4°F (-20°C) to 140°F (60°C)/Without Heater
    • -40°F (-40°C) to 140°F (60°C)/With Optional Heater (HTR)
  • Operator Duty Rating: High-cycle, high-temperature continuous-duty
  • Chassis: Constructed with 1/4 in. gold zinc-plated steel for rust prevention
  • Worm Gear Reduction: Two commercial oil bath gearboxes providing 900:1 worm gear reduction
  • Cover: High-density, UV-resistant polycarbonate 2-piece cover for excellent heat and corrosion resistance
  • Operator Weight: 206 lbs.
  • Recommended Capacities: Rated for gates up to 18 ft. in length or weighing up to 1,600lbs.
  • Battery Backup Operation:
    • Two (2) 7Ah Batteries/146 Cycles/24 Days Standby Time
    • Two (2) 33Ah Batteries/876 Cycles/105 Days Standby Time

PRODUCT HIGHLIGHTS

  • Item Number: CSW24U
  • High-Traffic Commercial Swing Gate Operator by LiftMaster
  • Engineered for more than a million cycles in high-traffic, heavy-duty, demanding applications
  • Rated for gates up to 18 feet in length and weighing up to 1,200 pounds
  • Ideal for large gated communities, residential developments, and commercial complexes
  • P3 Motor® is a continuous-duty motor designed by LiftMaster as a purpose built high-cycle high-temperature continuous duty motor to meet the exact requirements needed to open and close your gate
  • Heavy-Duty Commercial Gear-Driven Transmission provides unsurpassed reliability
  • Soft Start/Stop and Mid-Travel Reversal extends operator and hardware life in high-cycle and heavy-gate applications
  • Surge Suppression provides industrial surge and lightning protection against strikes up to 50-feet  away
  • Fire Department Compliance allows gate to auto-open upon loss of AC power or battery depletion
  • Wireless Dual-Gate Communication eliminates expensive conduit costs and avoids unsightly driveway scars
  • Emergency Release simple-to-use release handle allows gate to be operated manually and maintain limit position once re-engaged
  • LED Diagnostic Display simplifies installation and troubleshooting
  • Programmable Auxiliary Relays easily add additional features, such as warning lights/alarms
  • Bi-Part Delay monitors and adjusts speed and position of each wing to ensure primary gate closes last
  • Synchronized Close simultaneously closes gates
  • Pre-Motion Warning Alarm activates onboard alarm three seconds prior to gate motion
  • HomeLink® Compatible with Version 4 and higher
  • Security+ 2.0® On-Board Radio Receiver controls up to 50 remote controls
  • MyQ® Technology allows you to confidently know what's going on at home
  • MyQ® Technology lets you monitor and control your Gate Operator and home lighting from anywhere (when paired with the LiftMaster Internet Gateway)
  • MyQ® Technology enables you to receive email or text alerts so you always know the status of your gate and lighting
  • MyQ® Mobile App is free - no annual activation fee required
  • MyQ® Technology requires 828LM MyQ® Internet Gateway to connect to MyQ® Smartphone App
  • Ultra-Reliable Solar Power System can qualify homeowners for a Federal Tax credit equal to 30% of the installed cost of their LiftMaster Solar Powered Gate Operator System
  • Power Management System will allow you to get on and off your property even when the power's out
  • Battery Backup secures and safeguards your property by providing up to 146 cycles or 24 days of standby power when the power is down
  • Security+ 2.0™ patented multi-frequency secure radio technology which virtually eliminates interference and offers 2X the range of standard remotes
  • Quick-Close Feature closes the gate immediately after a vehicle pulls off the interrupt loop
  • Anti-Tailgate Feature pauses the gate when closing if a vehicle pulls onto the interrupt loop or breaks the beam and closes the gate once the vehicle backs up
  • Monitored Safety Inputs come standard with the CSW24U and allow you to attach additional safety reversing devices - includes 6 monitored safety inputs to cover all entrapment points and each entrapment point should be protected with its own device
  • Tested to UL/cUL Standards to meet the most stringent industry guidelines including the NEW 2016 UL 325 Gate Guidelines

CSW24UL-Product-Guide.pdf

CSW24UL-MANUAL.pdf