• Conventional surface, wall mount high-intensity audible and 1 flash per second strobe
  • Usually Ships 4 to 7 Business Days
LiftMaster

LIFTMASTER LMS24R STROBE, 12/24VDC, RED

SKU:
LMS24R
  • Conventional surface, wall mount high-intensity audible and 1 flash per second strobe
  • Usually Ships 4 to 7 Business Days
MSRP: $96.57
$87.79
(You save $8.78 )
Adding to cart… The item has been added
  • Shipping Cost? For the cost of shipping your item please add the item into the shopping cart. Once the part is in the cart fill out address information in the cart under the Shipping area in the Summary section. Our system will then calculate the shipping fee based on your location and the weight of the product. This is all done before you are asked to provide payment information.
LiftMaster LMS24R Fire Rated Red Strobe, 2 Wire 12/24VDC | LiftMaster LMS24R Fire Rated Red Strobe, 2 Wire 12/24VDC is an audio-visual warning device that broadcasts an emergency-level sonic alert and an adjustable brightness light strobe. North Shore Commercial Door has the products for safety needs. Plastic wall or surface-mount with angle contoured edges this signalling device can be used in conventional hall, entry/exit ways as well as numerous other settings. Simple single-paired wire hook-up install. PRODUCT HIGHLIGHTS | SPECS | TECHS
  • Basic interior-use red fire-strobe alert with adjustable volume settings and hi-visibility strobe flash
  • Strobe rate: 1/second
  • Rotating switch on exterior (no disassembly) to adjust volume of alert
  • Bright red color; vertical “FIRE” stenciling on angle-contoured body
  • Voltage used for install gives candela rating: 12 Volt/15 candela or 24 Volt/30 candela
  • 12 VDC or 24 VDC/FWR: Nominal Voltage (both regulated):
  • Operational Voltage range: 8 Volt to 17.5 Volt (12 V nominal) or 16 V to 33 V (24 V Nominal)
  • Can wired directly to LiftMaster DDO8900W Light-Duty JackShaft Dock Door Operator and similar heavy duty LiftMaster Operators (requires LiftMaster 100MAPS External Power Supply in this application)
  • Use on Commercial Door Operator or with on/off switch | requires toggle or other two-position switch for controlled use
  • Requires on/off switch for controlled usage
  • "Fire" designation, red color and stencil are aesthetic design | consult certified installer regarding coded, regulated installation and compatibility of this or similar devices
  • Dimension (when securely installed)
    • L: 5.6 in (143mm)
    • W: 3.46in (119mm)
    • D: 1.91in (49mm) (to end of lens)