Miller Edge RG Reflecti-Guard retro-reflective photo optic sensor will detect commercial door or gate obstacles and signal the motor to stop and/or reverse course. Miller Edge's trademarked photo optic sensor system, now available from North Shore Commercial Door, is compatible with almost all brands of UL325-recognizesd gate operators. Relay and pulsed models available. The relay model offers normally open, normally closed and 10k resistive output. The pulsed model offers 2 wire or 4 wire pulsed output. With this system, you can an emitter/receiver unit and a retro-reflector. When set up, any obstruction in a hazardous area will interrupt the visible light beam and signal the operator to stop or stop and reverse the door's motion. The photo eye is inside a NEMA 4-rated housing which measures 5.1 inches high, 2.8 inches long and 1.8 inches wide. Use this with pre- and post-2010 door operators and pre- and post-2016 gate operators to meet UL 325 regulations.
Spans distances up to 30'
Works with pre-/post-2010 door operators
Works with pre-post-2016 gate operators
Alignment LED = easy setup
UL 325-recognized for doors, gates
Impact resistant NEMA 4-rated enclosure
Enhanced sunlight immunity
For more product & how-to videos subscribe to our YouTube channel: