• Safety alert, door operation assistive device w/ added auxiliary options
  • Usually Ships Following Business Day
LiftMaster

LiftMaster LM21XPBB Extended Performance Release Device

SKU:
LM21XPBB
  • Safety alert, door operation assistive device w/ added auxiliary options
  • Usually Ships Following Business Day
availability:
available
MSRP: $818.99
$744.54
(You save $74.45 )
Adding to cart… The item has been added
  • Shipping Cost? For the cost of shipping your item please add the item into the shopping cart. Once the part is in the cart fill out address information in the cart under the Shipping area in the Summary section. Our system will then calculate the shipping fee based on your location and the weight of the product. This is all done before you are asked to provide payment information.
LiftMaster LM21XPBB Extended Performance Release Device | LiftMaster LM21XPBB Extended Performance Release Device is a fire and other exit safety device that help regulate door operation in emergency conditions. Requires use of 10k electrical resistive edge. Can activate through other initial warning systems as smoke alarms. Institutional, business, commercial and facility entryway needs including safety devices from North Shore Commercial Door. Allows use of battery back up which can also afford ancillary horn strobe devices. PRODUCT HIGHLIGHTS | TECHS | SPECS
  • Device transmits emergency alert signals to doors and actuate door placement
    • Single-slide
    • Rolling doors
    • Sliding-inclined door
    • Center-parting doors
  • Sensing edge required for installation
  • Device uses a 10k resistor
  • 10, 20, 30 and 60 second detection-to-alarm delay
  • Battery back up adaptable
    • SLA | 12V | 5Ah
  • Tie-in up to 4 smoke detectors and 2 horn strobes

  • HARD SPECS AND TECHS
    • Voltage Rating: 120vac, 60hz; 24 Vac; 24VDC
    • Standby Current: 0.06A; 0.3A; 0.2A
    • Alarm Current: 0.6A; 0.3A; 0.25A
    • Battery Rating: 12v 4.5ah Or 5.0ah Sealed Lead Acid Batteries (2), Maximum Charge Current .150amps
    • Battery Standby Time: LM21XPBB, 72 hours; LM21XPBBVB, 24 hours
    • Fuses: 3A @ 250v, 2AG Slo-Blo Type
    • Initiating Device:
      • Maximum line impedance 20 ohm;
      • Maximum current not to exceed 0.010A.
      • Maximum voltage 24Vdc
    • Auxiliary power: 24 VDC @ 0.5A Maximum
    • Common alarm trouble relays: 0.5A 125 VAC ; 60Hz
    • Max contact rating: 1A 24 VDC Resistive
    • Load Rating: support and release 40 lbs max
    • XPBB is free standing release with battery backup for sites where unit is NOT powered off the UL1481 regulated power supply with battery backup
    • **Device may require the purchase of additional data board, logic-related items, limit switches and or powering accessories**
    • Physical Dimensions
      • 9.7 in H
      • 7.5 in W
      • 5 in D
    • Weight: 18 lbs

LM21XPBB.pdf