Remote Control Solutions RCS-UR Universal Programmable Receiver

The RCS-UR is a universal receiver with a wide range of frequencies to work with virtually any garage door radio control. The RCS-UR configurable receiver processor works with six different frequencies: 295MHz, 418MHz, 433MHz, 310MHz, and 300MHz. These frequencies are selected by simply plugging in the desired radio frequency cards (RC) to the Receiver Processor Board. Use with any 26 or 30-bit Weigand selectable entry system, and use with any Dip-Switch or Wiegand Programmable Transmitter.

Features:

• RCS-UR Universal Configurable Receiver Processor

• Use with any 26 or 30-bit Wiegand selectable output entry system

• Use with any Dip-Switch or Wiegand Programmable transmitters

• Capable of using one or two RCS receiver cards

• Configurable to work with virtually any garage door transmitter frequency

• Select frequencies by plugging in desired radio frequency cards

• Output can be through a 3-wire 485 BUS RF output, NO/NC relay output, and/or the 4 wire Wiegand output terminal

• Wiegand output can be selected to 26 or 30 bit through the dip

• Available frequency cards from North Shore Commercial Door:

• RCS-433RC - 433MHz

• RCS-418RC - 418MHz

• RCS-318RC - 318MHz

• RCS-310RC - 310MHz

• RCS-300RC - 300MHz

• RCS-295RC - 295MHz