Get the SuperScan II 10SSTII42 active infrared door mounted safety sensor by BEA from North Shore Commercial Door. The SuperScan II 10SSTII42 active infrared presence detection sensor uses triangulation to detect pedestrians. This technology virtually eliminates false detections caused by varying floor and environment conditions. The highly versatile SuperScan II 10SSTII42 can be used with automatic swinging, revolving, folding and low energy doors.
The SuperScan II 10SSTII42 incorporates (1) master module and (1) slave module per housing. The unit can be daisy chained with up to 9 slave modules. The SuperScan II 10SSTII42 can be used on narrow or wide doors due to this flexibility. Independently angle each detection zone to eliminate unwanted detection of guide rails or walls. Coupled with BEA's Bodyguard overhead presence sensor, the SuperScan II 10SSTII42 meets ANSI 156.10 standard relating to swing doors. Suggested use for 44" door leaf.
The SuperScan II 10SSTII42 Includes: 1 Master module and 1 Slave module per housing. Overall length is 42 in. end cap to end cap.
Product Highlights:
- Product Number: 10SSTII42
- Door mounted presence detector
- Active infrared
- For use with swinging, revolving, low energy, high performance and off doors
- Master with up to 8 slaves monitored or up to 9 slaves non-monitored
- Field cut housing to desired door widths
- When coupled with BEA's Bodyguard overhead sensor, SuperScan meets ANSI 156.10 standard for swing doors
- Relay hold time can be adjusted from .1 to 4.5 seconds
- Unit can be set to background analysis mode to reduce the chance of non-detection from faulty environment situations
- Suggested use for 44" door leaf
Technical Information:
- Technology: Focused Active Infrared
- Detection Mode: Presence
- Measurement of Distance: Triangulation
- Supply Voltage: 12 to 24 VAC ± 10% / 12 to 24 VDC + 10%
- Detection Range: 0 in. to 96 in. (0 ft. to 8 ft.)
- Detection Signal Duration: Infinite Presence Detection
- Output: Single Relay
- Maximum Contact Rating: 1 A @ 30 V (resistive)
- Hold Time: 0.1 to 4.5 Seconds
- LED Indications:
- Master: Red LED = Detection
- Green LED = Active Output
- Slave: Red LED = Detection
- Operating Temperature Range: -30˚ F to 140˚ F
- PCB Dimensions:
- Master: 10.91 in x 1.5 in
- Slave: 8.75 in x 1.5 in
- Max. Number of Slaves:
- Standard: 9
- With Monitoring: 8 max.
- Function Selections:
- Detection Mode - NO or NC
- Normal Mode or Background Analysis Mode
- Response Time: < 50 ms
- Material: Aluminum, ABS plastic / acrylic
- Housing Color: Black
- Degree of Protection: IP54
