BEA SuperScan I Custom Series Presence Sensor 10SSICUSTOM

The SuperScan I Custom Series 10SSTICUSTOM door mounted safety sensor by BEA is now available to order from North Shore Commercial Door. This active infrared presence detector virtually eliminates false detections caused by varying floor and environment conditions using triangualtion. The versatile SuperScan I Custom Series 10SSTICUSTOM can be used with automatic swinging, revolving, folding and low energy doors.

The SuperScan I Custom Series 10SSTICUSTOM incorporates (1) master per housing. The SuperScan II Custom Series 10SSTICUSTOM can be used on narrow or wide doors and daisy chained with up to 9 slave modules. Angling each detection zone independently will eliminate unwanted detection of guide rails or walls. Coupled with BEA's Bodyguard overhead presence sensor, the SuperScan I Custom Series 10SSTICUSTOM meets ANSI 156.10 standard relating to swing doors.

The SuperScan I Custom Series 10SSTICUSTOM Includes: 1 Master module per housing. Custom housing length cut to specification.

**Please note: This product incurs a 24-48 hour lead time from the time the order is received. Contact North Shore Commercial Door at 1-800-783-6112 for details.

Product Highlights:

• Product Number:  10SSTICUSTOM

• Door mounted presence detector

• Active infrared

• For use with swinging, revolving, low energy, high performance and off doors

• Master with up to 8 slaves monitored or up to 9 slaves non-monitored

• Field cut housing to desired door widths

• When coupled with BEA's Bodyguard overhead sensor, SuperScan meets ANSI 156.10 standard for swing doors

• Relay hold time can be adjusted from .1 to 4.5 seconds

• Unit can be set to background analysis mode to reduce the chance of non-detection from faulty environment situations

• Field cut housing to desired door widths

Technical Information:

• Technology: Focused Active Infrared

• Detection Mode: Presence

• Measurement of Distance: Triangulation

• Supply Voltage: 12 to 24 VAC ± 10% / 12 to 24 VDC + 10%

• Detection Range: 0 in. to 96 in. (0 ft. to 8 ft.)

• Detection Signal Duration: Infinite Presence Detection

• Output: Single Relay

  • Maximum Contact Rating: 1 A @ 30 V (resistive)

  • Hold Time: 0.1 to 4.5 Seconds

• LED Indications:

  • Master: Red LED = Detection

  • Green LED = Active Output

  • Slave: Red LED = Detection

• Operating Temperature Range: -30˚ F to 140˚ F

• PCB Dimensions:

  • Master: 10.91 in x 1.5 in

  • Slave: 8.75 in x 1.5 in

• Max. Number of Slaves:

  • Standard: 9

  • With Monitoring: 8 max.

• Function Selections:

  • Detection Mode - NO or NC

  • Normal Mode or Background Analysis Mode

• Response Time: < 50 ms

• Material: Aluminum, ABS plastic / acrylic

• Housing Color: Black

• Degree of Protection: IP54