BEA

BEA SuperScan II Custom Series Presence Sensor 10SSTIICUSTOM

SKU:
10SSTIICUSTOM
MSRP: $516.48
$469.53
(You save $46.95 )
Adding to cart… The item has been added
  • Shipping Cost? For the cost of shipping your item please add the item into the shopping cart. Once the part is in the cart fill out address information in the cart under the Shipping area in the Summary section. Our system will then calculate the shipping fee based on your location and the weight of the product. This is all done before you are asked to provide payment information.

 

North Shore Commercial Door presents the SuperScan II Custom Series 10SSTIICUSTOM door mounted safety sensor. This active infrared presence detector uses triangulation to detect pedestrians- virtually eliminating false detections caused by varying floor and environment conditions. The SuperScan II Custom Series 10SSTIICUSTOM is highly versatile and can be used with automatic swinging, revolving, folding and low energy doors.

The SuperScan II Custom Series 10SSTIICUSTOM incorporates (1) master and (1) slave per housing. Daisy chained with up to 9 slave modules, the SuperScan II Custom Series 10SSTIICUSTOM can be used on narrow or wide doors. Eliminate unwanted detection of guide rails or walls by Independently angling each detection zone. Coupled with BEA's Bodyguard overhead presence sensor, the SuperScan II Custom Series 10SSTIICUSTOM meets ANSI 156.10 standard relating to swing doors.

The SuperScan II Custom Series 10SSTIICUSTOM Includes: 1 Master module and 1 Slave module per housing. Custom housing length cut to specification between 36” – 48”.

**Please note: This product incurs a 24-48 hour lead time from the time the order is received. Contact North Shore Commercial Door at 1-800-783-6112 for details.

Product Highlights:

  • Product Number:  10SSTIICUSTOM

  • Door mounted presence detector

  • Active infrared

  • For use with swinging, revolving, low energy, high performance and off doors

  • Master with up to 8 slaves monitored or up to 9 slaves non-monitored

  • Field cut housing to desired door widths

  • When coupled with BEA's Bodyguard overhead sensor, SuperScan meets ANSI 156.10 standard for swing doors

  • Relay hold time can be adjusted from .1 to 4.5 seconds

  • Unit can be set to background analysis mode to reduce the chance of non-detection from faulty environment situations

  • Field cut housing to desired door widths

Technical Information:

  • Technology: Focused Active Infrared

  • Detection Mode: Presence

  • Measurement of Distance: Triangulation

  • Supply Voltage: 12 to 24 VAC ± 10% / 12 to 24 VDC + 10%

  • Detection Range: 0 in. to 96 in. (0 ft. to 8 ft.)

  • Detection Signal Duration: Infinite Presence Detection

  • Output: Single Relay

    • Maximum Contact Rating: 1 A @ 30 V (resistive)

    • Hold Time: 0.1 to 4.5 Seconds

  • LED Indications:

    • Master: Red LED = Detection

    • Green LED = Active Output

    • Slave: Red LED = Detection

  • Operating Temperature Range: -30˚ F to 140˚ F

  • PCB Dimensions:

    • Master: 10.91 in x 1.5 in

    • Slave: 8.75 in x 1.5 in

  • Max. Number of Slaves:

    • Standard: 9

    • With Monitoring: 8 max.

  • Function Selections:

    • Detection Mode - NO or NC

    • Normal Mode or Background Analysis Mode

  • Response Time: < 50 ms

  • Material: Aluminum, ABS plastic / acrylic

  • Housing Color: Black

  • Degree of Protection: IP54

SUPERSCAN-CUT.pdf

BEA-SuperScan-Manual.pdf