- Made for extreme weather conditions, cold, dust, or heat
- Usually Ships Following Business Day
Action Industries
Tri-Fin Polar Seal Weather Seal Kit
- Made for extreme weather conditions, cold, dust, or heat
- Usually Ships Following Business Day
- atc-product:
- epdmsealkit-standard-10x10
- atc-product:
- EPDMSEALKIT-STANDARD-8X10
- atc-product:
- EPDMSEALKIT-STANDARD-8X8
- atc-product:
- EPDMSEALKIT-STANDARD-9X10
- atc-product:
- EPDMSEALKIT-STANDARD-12x12
- atc-product:
- EPDMSEALKIT-STANDARD-12x14
Protect the inside of your garage from weather, dust, and drafts by sealing the top and sides with a Tri-Fin Weather Seal Kit from Action Industries. This kit comes with a 45º retainer profile that holds the Tri-Fin seal flush against the exterior of the door to form an extra tight seal. The 45º retainer profile holds seals flush with the door jamb so the bottom of the seal presses firmly against the exterior of the door. This retainer profile is effective for doors with more uneven surfaces where they meet the header and door jambs such as corrugated doors, roll up doors, and rolling steel doors.
Precut and Pre-Assembled
Every Action Industries Weather Seal Kit comes pre-cut with everything you need for a straightforward installation of top, left, and right garage door weather seals. Each Kit includes one solid piece of seal to be cut down in the field and threaded into our corrosion proof aluminum retainers. Cut-down retainers come pre-tapped with holes for fasteners, so no additional drilling is required for installation. Simply open your Action Industries Weather Seal Kit, measure the door width and height, cut the seal and install the retainers with included self-tapping fasteners. Tri-Fin Seals are made from EPDM rubber, which can endure severe weather conditions and stay pliable in freezing weather. Our Tri-Fin Weather Seal Kits are customizable to suit the needs of a variety of doors. Use the drop-down menu to select the right door size for you and cut down to size for smaller doors:
Every Action Industries Weather Seal Kit comes pre-cut with everything you need for a straightforward installation of top, left, and right garage door weather seals. Each Kit includes one solid piece of seal to be cut down in the field and threaded into our corrosion proof aluminum retainers. Cut-down retainers come pre-tapped with holes for fasteners, so no additional drilling is required for installation. Simply open your Action Industries Weather Seal Kit, measure the door width and height, cut the seal and install the retainers with included self-tapping fasteners. Tri-Fin Seals are made from EPDM rubber, which can endure severe weather conditions and stay pliable in freezing weather. Our Tri-Fin Weather Seal Kits are customizable to suit the needs of a variety of doors. Use the drop-down menu to select the right door size for you and cut down to size for smaller doors:
- 109-0631-SK – 10 ft. x 10 ft.
- 109-0632-SK – 12 ft. x 12 ft.
- 109-0633-SK – 14 ft. x 14 ft. Kit Contents:
- 10 ft. x 10 ft.
- 6x A0282 Standard 45º Retainer - 5'1" sections
- 1x 30.5 Feet - Tri-Fin Seal (to be cut down in the field)
- 36X Fasteners
- 1x installation instructions
- 12 ft. x 12 ft.
- 9x A0282 Standard 45º Retainer - 4'1" sections
- 36.75 Feet - Tri-Fin Seal (one piece to be cut to your needs)
- 39X Fasteners
- 1x installation instructions
- 14 ft. x 14 ft.
- 4x A0282 Standard 45º Retainer - 5'1" sections
- 5x A0282 Standard 45º Retainer - 4'1" sections
- 40.75 Feet - Tri-Fin Seal (Single piece to ensure a proper fit)
- 51X Fastners
- 1x installation instructions
- Pre-punched, pre-cut materials
- TRI-FIN Seal comes in one piece to eliminate seems in the middle of door.
- Seals the perimeter of the door
- Includes all required fasteners
- No additional drilling required for installation
- Tri-Fin seal is designed to withstand freezing weather conditions
- Standard 45º retainers and weather seal
- Universal - comes in three sizes: 10’x10’, 12’x12’, and 14’x14’