• Safety door functional management panel has auxiliary terminals for added safety devices
  • Usually Ships 4 to 7 Business Days
LiftMaster

LiftMaster LM21XP Fire Door Control Device

SKU:
LM21XP
  • Safety door functional management panel has auxiliary terminals for added safety devices
  • Usually Ships 4 to 7 Business Days
MSRP: $548.22
$498.38
(You save $49.84 )
Adding to cart… The item has been added
  • Shipping Cost? For the cost of shipping your item please add the item into the shopping cart. Once the part is in the cart fill out address information in the cart under the Shipping area in the Summary section. Our system will then calculate the shipping fee based on your location and the weight of the product. This is all done before you are asked to provide payment information.
LiftMaster LM21XP Fire Door Control Device | LiftMaster LM21XP Fire Door Control Device manages access and door positioning for motorized or manual emergency doors. This normally-energized, fail-safe configured panel is activated by an automatic initiating device as a smoke alarm. Incorporates a reverse electric safety edge. Safety devices for home, business and facilities from North Shore Commercial Door. Can be integrated to function with a door operator or for manually operated doors. Uses 2.2K Ohm resistor. PRODUCT HIGHLIGHTS | TECHS | SPECS
  • Access and safety door assistive device responds to initiating device: can accommodate up to 4 smoke alarms
  • Rolling door
  • Single-slide
  • Sliding-inclined doors
  • Center parting doors
  • 3-cycle obstruction count
  • 10, 20, 30 and 60 programmable response delay minimizes nuisance alarms

  • HARD SPECS AND TECHS
    • Voltage Rating: 24 VDC
    • Standby Current: 0.100a
    • Alarm Current: 0.15a
    • Initiating Device: Maximum line impedance 20 ohm; Maximum current not to exceed 0.010A.; Maximum voltage 28Vdc
    • Input Current not to exceed 0.004A
    • Common Alarm and Trouble Relay: 0.5 A | 125 VAC | 60 Hz
    • Max contact rating: 1A 24 VDC Resistive
    • Load Rating: Support and Release 40 lbs Max
    • XP is for sites where the free standing release will be powered of the UL1481 regulated power supply with battery backup
    • **Device may require the purchase of additional data board, logic-related items, limit switches and or powering accessories**
    • Physical Dimensions
      • 9.7 in H
      • 7.5 in W
      • 5 in D
    • Weight: 8 lbs

LM21XP--MANUAL.pdf