Skip Navigation

Garage Door Opener Universal Radio Receiver Set - North Shore Commercial Door RC-1

Garage Door Opener Universal Radio Receiver Set - North Shore Commercial Door RC-1
Garage Door Opener Universal Radio Receiver Set - North Shore Commercial Door RC-1
Garage Door Opener Universal Radio Receiver Set - North Shore Commercial Door RC-1
Garage Door Opener Universal Radio Receiver Set - North Shore Commercial Door RC-1
Garage Door Opener Universal Radio Receiver Set - North Shore Commercial Door RC-1
Garage Door Opener Universal Radio Receiver Set - North Shore Commercial Door RC-1
YouTube Video Icon
Shipping Costs Shipping Costs
This item is discontinued.
Please view this replacement item:
LiftMaster Security+ Receiver Kit With 365LM and 371LM Universal
This item is discontinued. Please view this replacement item:
Product Description
Not sure which remotes work with your garage door operator? You will need to buy this Universal Garage door remote kit. It comes with a new receiver, making it fully universal unlike many remotes on the market that claim they are “universal”. The RC-1 from North Shore Commercial Door is a sure fire way to get a working remote for your garage door. The kit comes with a new receiver (Part number NSCD-RX433RC1) and one new remote (NSCD-433RC1). This replacement kit from North Shore Commercial Door Operates on a secure frequency of 433.92MHZ and uses rolling code technology and promotes longer range than standard garage remotes. 

Worried about programming and installation? Don’t be! The receiver has holes in each corner for easy and secure mounting. Programming the remotes is a breeze as well! The RC-1 programs via learn button, This means you just have to put the receiver in programming mode, press the button on the remote, and the receivers light color should change from blue to purple. This indicates that the remote has synced up and is ready for use.

Product Highlights:
• Receiver Kit from North Shore Commercial Door
• Receiver Part Number NSCD-RX433RC1
• Remote Part number NSCD-433RC1
• Operates on secured frequency of 433.92 MHZ
• 12 Volts
• Mounting holes in each corner for easy and secure mounting.
• Color coded indicator for programming
• built in 18 Gauge Red antenna wire


Kit includes:
• Receiver
• Transformer for power
• One remote with battery and visor clip
• 10’ strand of 2-wire bell wire used for connection between receiver and the operator
• Installation and programming instructions.
Product Videos

For more product & how-to videos subscribe to our YouTube channel:

Related Products
Ask a Question
COMMENT: I chose this item because Nort Sshore did a great job in presenting to me that this item could fix my problem. The receiver looks very similar to what is on the current opener and they also spoke about the phone support if needed. The video was a good selling point as well. by Dennis M 10/6/2017
COMMENT: You're 100% correct, both universal remotes I have purchased are not universal. This item, these items, seem to be the solution to my dilemma of a lost remote. Thank you. by Jim B 9/28/2017
QUESTION: Will this work for my 1986 Genie screw-drive Pro-8800? by None N 3/5/2017
ANSWER: No doubt in mind it will work on any unit with a low voltage manual push button capability.. Just connect the two new receiver wires to the manual button connection screws. Mine works terrific. by Roger S a
ANSWER: It will work with any door opener. Just mount the receiver on the wall and connect the two wires that go to your wall button to this receiver. by Arthur S a
QUESTION: looking at the rc-1 garage door remote. Can I get more than 2 remotes? by None N 1/17/2017
ANSWER: Yes you should d be able to get more than 2 remotes. When I ordered my opener, I only got one and I contacted North Shore and they sent a second one. I think you would need to program each one. Mark is always helpful. Dave B by David B a
ANSWER: I'm sure you can. call them by Mike F a
ANSWER: You can have up to 85 Transmitters remotes... I'm guessing that should cover you needs.. : by Michael L a
QUESTION: Will this work with my lynx commercial garage door opener? I has the 3 button wall switch with up,down and stop buttons by daniel k 12/3/2016
ANSWER: sorry I didn't have that kind only two buttons by Robert W a
ANSWER: If the commercial garage door opener has three separate relays, I think you should contact North Shore. I'll bet they can give you a solution. They are very helpful. by Roger S a
ANSWER: I do not know. I could never get the one i bought to work. Surely it was operator error. Thanks by JOHN K a
QUESTION: i am wondering if this will work on o old overhead opener 65B as I cant get the new remote I bought to work out side the garage and thought this might be better? by Philip P 8/12/2016
ANSWER: I don't work for North Shore, but I am a satisfied customer. Their product worked for me on my old Sears opener. I hooked the 2 wires to my wall switch and I have an opener for the fist time in 10 years. If you have 2 leads going into your switch, I thinks it might work. Dave by David B a
ANSWER: I do not know; I bought this equipment and never could get it to work- held onto it thinking my more tech-savvy son would come along soon and make it go: meantime the mechanical part of this older garage door blew up so I bought a new door, closer and tech stuff; never used it. thanks by JOHN K a
ANSWER: I don't remember what my number was but my overhead opener was made in 1994. I bought the universal remote two years ago and it worked with no problems by William W a
ANSWER: This will work with anything that has a wired button to open the door. I get about 45-50 feet of distance on mine. by Michael L a
Product Manual