- Usually Ships 4 to 7 Business Days
Micanan
Micanan PRO-J5011 Jackshaft: 1/2 HP 115V 1PH
- Usually Ships 4 to 7 Business Days
- availability:
- available
Micanan Commercial Garage Door Opener PRO-J
COMMERCIAL / INDUSTRIAL CONTINUOUS DUTY BELT DRIVE JACKSHAFT
Designed for use on commercial / industrial sectional doors with high or vertical lift track and small rolling grilles
Product Highlights:
Designed for use on commercial / industrial sectional doors with high or vertical lift track and small rolling grilles
Product Highlights:
- Part Number: PRO-J
- Continuous duty 1725 rpm industrial/commercial belt drive jackshaft operator
- Designed for commercial high lift, vertical lift, rolling doors and rolling grilles driven by a drive shaft
- Built-in overload protection 93-phase) or separate full overload protection (1-phase)
- On board receiver with antenna
- External radio control terminal strip
- Low friction powder metal limit cam nuts with fully adjustable rotary limit switches
- Three button open-close stop control station Nema-1 rated
- Motor removable without affecting limit settings
- 1/3, ½, ¾ or 1 horsepower
- Voltage: 115V 1-phase, 230V 1-phase, 230V 3-phase, 460V 3-phase, 575V 3-phase
- Output shaft speed is 36 RPM
- Maximum of 15 complete cycles per hour
- Primary reduction: (5L) V-belt and pulleys (2” to 8” diameter) Secondary reduction: #41 chain and sprockets
- #41 roller chain & sprockets on all internal drives
- #50 roller chain and sprockets on final drive
- Baked on dark grey coat finish
- 3/4” permanently lubricated & 1” permanently lubricated & sealed ball bearings on final drive shaft
- Chain keeper
- Left or right hand mounting
- Mechanical brake system
- Solenoid actuated drum and brake shoe braking system to prevent coasting and maintain door position
- Solenoid brake (optional PRO-JB) recommended for large doors
- C-2 wiring constant pressure on close, momentary contact on open and stop
- Wired to accept reversing edge, radio control, photocells, loops and OPEN/CLOSE devices
- 24VAC control circuit to protect against short circuit, supplies power to drive control relays with 15VA power available for external devices
- 4 micro limit switches that control door travel activated by fully adjustable screw type cams
- Floor level cable disconnect system with electrical cut-out feature for manual operation of the door by hand in the event of an emergency
- Adjustable friction clutch to minimize damage to door operator, door or vehicles
- Two-year warranty
- Shipping weight: 95 lbs.
- N-1 Micanan photocells included for doors up to 24’ wide
- 1 x OPEN/CLOSE/STOP 3-button control station
- 1 x #50 Drive chain package: 4’ (1.2m) c/w #50 connecting link
- 1 x Drive Sprocket 50B12 x 1” c/w 2 set screws and ¼” x 1-1/4” keyway
- 1 x Door Sprocket 50B18 x 1” c/w 2 set screws and ¼” x 1-1/4” keyway (sprocket size and bore may vary according to door size and type, shaft size and drum diameter
- 1 x Chain keeper
- 1 x Keyring
- 3/8” bolt, hex nut, lock washer and flat washer
- 1 x pocket wheel hand chain (Model PRO-H) (2 x door height less 4’ (1.2m))
- 1 x Set of Warning signs
