Pizza Wheel and Wedge Tool
The BD Loops Pizza Wheel and Wedge Tool is made of smooth and durable PVC that will not knick the loop wire. It also allows installers to rapidly and sufficiently roll loop wire into the bottom of the saw-cut grove while standing.
The flat and angled wedge tool allows installers to effortlessly push wire down into 135 dog eared corner cuts. The Pizza Wheel and Wedge Tool is designed to work best with BD Loops 3/16" Preformed Loops.
Some loop installers choose to use sticks, screw drivers, paint mixers, or other tools to stuff saw-cut loops into saw-cut grooves. These tools can damaged the loop wire and cause the loop to short to ground. Not only that but also these tools are completely inefficient. Save the wear and tear on your body and use the Pizza Wheel and Wedge Tool.
The Pizza Wheel and Wedge Tool has a 3/4" PVC coupler to accept any length 3/4" PVC handle, we recommend the use of Schedule 80 PVC conduit. See the Pizza Wheel and Wedge Tool in use:
- Part Number: PR-3-16
- Dog ear corner block allows installers to rapidly mark the dog ear corners, easily trace around the block with the included construction crayon.
- Quickly and simply roll the loop to the bottom of the saw-cut groove.
- Made for saw-cut depth up to 2 1/4 inches.
- The Pizza Wheel and Wedge Tool can also be utilized to assist clean out the saw-cut groove