• Usually Ships 4 to 7 Business Days
Tucker Auto-Mation

Tucker Auto-Mation Spindle Adapters

SKU:
200-1023
  • Usually Ships 4 to 7 Business Days
availability:
disabled
MSRP: $42.49 - $52.38
$38.63 - $50.03
  • Shipping Cost? For the cost of shipping your item please add the item into the shopping cart. Once the part is in the cart fill out address information in the cart under the Shipping area in the Summary section. Our system will then calculate the shipping fee based on your location and the weight of the product. This is all done before you are asked to provide payment information.

Spindle Adapters by Tucker Auto-Mation for SW10 and SW19 series single, double, and dual egress swing door operators are now available to order from North Shore Commercial Door. The spindle attaches to the arm of the operator and can be different lengths to adjust the arm location. Spindle adapters come in four different sizes: 20mm, 35mm, 50mm and 80mm. The spindles are measured from the top of the barrel to the surface where the top of the door arm rests. The default size for all pull arms is 20mm. The default size for all push arms is 35mm. 

***IMPORTANT NOTE ABOUT PRICING AND ORDERING***

  • Please select 20mm, 35mm, 50mm or 80mm from the drop-down menu above to select the correct size Spindle Adapter.

Product Highlights:

  • Item Number: 200-1023
  • Spindle Adapters by Tucker Auto-Mation
  • Attaches to the arm of the operator
  • Can be different lengths to adjust the arm location
  • Available in four different sizes:
    • 20mm - 200-1645
    • 35mm - 200-1646
    • 50mm - 200-1647
    • 80mm - 200-1648
  • Measured from the top of the barrel to the surface where the top of the door arm rests
  • Default size for all pull arms is 20mm
  • Default size for all push arms is 35mm