• Usually Ships Following Business Day
PowerMaster

POWERMASTER 29-20003 RECEIVER MODEL R2701 SINGLE CHANNEL PLUG-IN ROLLING CODE RECEIVER

SKU:
29-20003
  • Usually Ships Following Business Day
atc-product:
29-20007
atc-product:
29-20005
atc-product:
29-20004
availability:
available
MSRP: $69.84
$63.49
(You save $6.35 )
Adding to cart… The item has been added
  • Shipping Cost? For the cost of shipping your item please add the item into the shopping cart. Once the part is in the cart fill out address information in the cart under the Shipping area in the Summary section. Our system will then calculate the shipping fee based on your location and the weight of the product. This is all done before you are asked to provide payment information.
PowerMaster 29-20003 Receiver Model R2701 Single Channel Plug-In Rolling Code Receiver. This secure receiver is compatible with PowerMaster Models 642 and 643, which use a frequency of 433 Mhz. Installation is a breeze as the receiver plugs right into the control box and has the ability to program up to 30 transmitters before reaching capacity. DIMENSIONS:
  • Length: 2-1/4 Inches
  • Width: 1-5/16 Inches
  • Depth: 3/4 Inches
Product Highlights: PROGRAMMING A TRANSMITTER
  1. Press the learn button on the receiver and wait for the LED light to turn red.
  2. Press any one of the transmitter buttons twice.
  3. The LED will flicker for several seconds before turning off which will indicate that the learning process is complete and successful.
DELETING A TRANSMITTER
  1. Press and hold the learn button on the receiver for approximately 8 seconds after the red LED light turns on.
  2. Once the red LED light is off, release the learn button.
  3. The LED will turn red again for 2 seconds before turning off indicating that the deleting of the transmitter is complete.