BEA

Micro-Processed Lock-Out Relay Module 10LO21K for KM 3800 Controls by BEA

This item is discontinued. Please view this replacement item:

MSRP: $101.17
$84.30
(You save $16.87 )
Adding to cart… The item has been added
  • Shipping Cost? For the cost of shipping your item please add the item into the shopping cart. Once the part is in the cart fill out address information in the cart under the Shipping area in the Summary section. Our system will then calculate the shipping fee based on your location and the weight of the product. This is all done before you are asked to provide payment information.

North Shore Commercial Door now carries the 10LO21K Lock-Out Module by BEA. The 10LO21K is a micro-processed lockout module designed to operate with the Keane Monroe 3100 Swing Door System ONLY! The 10LO21K is used with BEA's Bodyguard or DK12 overhead presence sensors. The Lock-Out module locks out header-mounted safety sensors while the door is in closing cycle. The 10LO21K interprets door open or door closed positions by reading the motor voltage input. The 10LO21K communicates the position of the door based on the motor voltage information to the Bodyguard or DK12 via data lines. The 10LO21K provides optional safety beam input to override the inhibit signal during closing. For example, when the safety beam path is blocked or interrupted during closing, the inhibit data will be canceled, thus initiating a safety signal to the door control safety input.

***Please Note: The 10LO21K module is designed specifically for the KM3100 K-Control only, and must not be used on other brands/models of operators! Damage to module may result if this occurs.

Product Highlights:

  • Item Number: 10LO21K
  • Micro-processed lockout module
  • Operates with the Keane Monroe 3100 Swing Door System ONLY used with BEA's Bodyguard or DK12 overhead presence sensor
  • Locks out header-mounted safety sensor while the door is in closing cycle
  • Interprets position of the door by reading the motor voltage
  • Communicates the position of the door to the Bodyguard or DK12 via data lines
  • Provides optional safety beam input to override the inhibit signal during closing
  • When safety beam path is blocked or interrupted during closing, the inhibit data will be canceled, thus initiating a safety signal to the door control safety input
  • Designed specifically for the KM3100 K-Control only, and must not be used on other brands/models of operators! Damage to module may result if this occurs.

​Technical Information:

  • Power Supply: 12-24 Volts AC / 15-24 Volts DC
  • Operating Frequency: 4 MHz (Microprocessor)
  • Power Consumption: 10 mA at rest, 50 mA Max.
  • Output: 2 x SPST Relays
  • Max. Voltage - Relay Contact: 60V DC, 120V AC
  • Max. Current - Relay Contacts (both): 2A DC, 0.5A AC

10LO21K-UG.pdf