• Usually Ships 4 to 7 Business Days

Genie 41488R Intellicode and Fixed Code Three Door Receiver

  • Usually Ships 4 to 7 Business Days
MSRP: $135.61
(You save $12.33 )
Adding to cart… The item has been added
  • Shipping Cost? For the cost of shipping your item please add the item into the shopping cart. Once the part is in the cart fill out address information in the cart under the Shipping area in the Summary section. Our system will then calculate the shipping fee based on your location and the weight of the product. This is all done before you are asked to provide payment information.

Genie’s 41488R External Three Door Receiver allows up to 255 Intellicode transmitters used across three garage doors. The 41488R uses 315/390 MHz Intellicode dual band technology for increased door security on older operators and reduces chances of signal interference. A set of 9-trinary dip switches allowed for fixed code use at 390 Mhz. Genie Intellicode Transmitters are also available to purchase from North Shore Commercial Door.

Product Highlights:
  • External 3-door Garage Door Receiver
  • Allows up to 255 Intellicode Transmitters combined across three doors
  • Single door mode allows for Open/Close/Stop functionality for a single door
  • Powered by plugging directly into the operator or with an optional A/C adapter pack (Liftmaster part # 39193A.S)
  • Fixed code frequency 390 MHz
  • 315/390 MHz Intellicode Dual Band Technology
  • Supports an unlimited number of fixed code remote controls on up to three doors
  • A unique fixed code can be based on each door
  • Remote and fixed code mode may be configured on any of the three door outputs
  • Compatible with the 39193A.S Power Adapter
  • Genie single door intellicode receivers also available from North Shore Commercial Door
  • Receiver Input Voltage: 9-42 VDC or 9-30 VAC, 50-60 Hz

  • Receiver current draw: 150mA@9V, 141mA@12V, 104mA@24V, 85mA@42V

  • Power Pack: 115 VAC, 0.5 A, 50-60 Hz
  • Power Pack Output: 12 VDC, 1 A
  • Temperature Range: -30°F to 158°F
  • Includes: Intellicode receiver, antenna, wire, staples, and instructions
  • Receiver dimensions:
    • Height: 5-11/16 inches
    • Width: 5-3/8 inches
    • Depth: 1-3/8 inches
  • Antenna dimensions:
    • Height: 1-1/4 inches
    • Length: 9-1/4 inches
    Compatible with the following Genie Remote Controls from Action Industries: