- Usually Ships Following Business Day
Zap
ZAP 8825-HP Series 3 High Power Sectional Jackshaft Garage Door Opener
- Usually Ships Following Business Day
Are you looking for one the safest, quietest, smallest side mount DC operators in the industry today? Look no further! The Zap DC garage door operator is your answer. The Zap operator features SafetySense technology, which is one of the industries most advanced obstruction detection systems available. This technology allows the Zap operator to detect an obstruction on any part of the door, whether it’s opening or closing. This means a safe garage door operator not only for you, but for your door and its surroundings.
The Model 8825-3-HP is a heavy duty commercial model operator with a 1 1/2HP motor is capable of running sectional overhead garage doors up to 480 square feet in size, 1800 lbs. in balanced weight, with track configurations such as low headroom, standard lift, high lift, and full vertical lift. Like all the Zap model operators, the motor assembly only contains the motor, two pulleys and one belt, which means no chains or sprockets making all that unnecessary noise in your garage or shop.
The 8825-3-HP only requires 7 1/4” of side clearance and 5” above the center of your spring shaft, so limited space is not an issue. The entire operator is NEMA 4 rated for resistance to water/moisture. The 8825-3-HP offers many built in program features that are standard, including auto close timer, cycle counter, and service due reminder.
You can also incorporate a multitude of auxiliary items to the Zap 8825-3-HP. These include, but are not limited to interior/exterior lighting, additional wall controls, swipe card devices, dock equipment, motion sensors, and alarm systems, and many more.
Installation of the 8825-3-HP is as simple as it gets. It only requires one person with a ladder to install the motor assembly on the spring shaft. Nothing mounts to the wall, jamb, or header area. Unlike traditional operators, you won’t be needing the scissors lift, two people, or a welder for this installation. The Zap control box is even easier to install. Just four screws to fasten it to the wall near the door, and power it up by plugging it into a nearby outlet in your garage or shop (electrical pigtail required). Now it’s just a matter of running the door open and close two times with the 8825-3-HP and it will set it’s fully open and closed positions for you. You just stand back and watch!
The North Shore Commercial Door family is very impressed with the Zap Operator model 8825-3-HP DC Unit. We are very confident that this product will meet and exceed your expectations.
Product Highlights:
- Part Number: 8825-3 HPB
- Side mount
- DC operator
- Heavy duty commercial model operator
- 1 ½ horsepower
- Safe, quiet & small
- Compatible door sizes: Up to 480 sq. ft./1800 lbs.
- Contains the motor, two pulleys & one belt
- Requires 7 ¼” side clearance & 5” clearance above center spring shaft
- Program features include auto close timer, cycle counter and service due reminder
- Auxiliary capabilities include interior/exterior lighting, wall controls, swipe card devices, dock equipment, motion sensors, alarm systems & more
- Simple installation of motor assembly to spring shaft
- Control box fastens to the wall near the door & plug into outlet (electrical pigtail required)
- Set fully open and closed positions by running the door open and close two times
- Controller case rating: NEMA 4X/IP66
- Controller dimensions: 8.7” H x 10.6” W x 4.5” D
- Single phase voltage: 115 V US, 208-230V US, 208-230V EU
- Amp draw: 5.8A
- Control circuit voltage: 6VDC
- Power rating: 2000 Newtons Equiv. 1.5 HP
- Operator Motor Head Rating: NEMA 4*
- Motor type: DC Gear Reduced
- Motor cover dimensions: N/A
- Motor Voltage: 48-54 VDC
- Limits determination: Physical/Self Calibrating
- Duty cycle rating: Continuous
- Operating temp range: -22 deg F to 212 deg F
- Overload protection: Inherent motor current sensing
- Torsion shaft type required: Solid w/keyway or hollow tube
- Fits torsion shafts diameter: 1”
- 8825-3-HPB fits 1 Inch shaft
- 8825-3HPC and 8825-3-HPD Work on Both 1 Inch and 1-1/4 Inch Shafts
- Torsion shaft length required: 4.5” beyond outer edge of track
- Side clearance required: 5” min for motor only
- Side clearance required: 7” with motor cover applied
- Replacement motor PN: 600814
- Replacement belt PN/size: 8825-HPB PN600617 (AX29)
North Shore Commercial Door
North Shore Commercial Door NSCD-433RC1 Rolling Co…
NSCD-433RC1
MSRP:
$21.95
$19.95
North Shore Commercial Door
North Shore Commercial Door NSCD-433RC3 Rolling Co…
NSCD-433RC3
MSRP:
$22.84
$20.76
North Shore Commercial Door
NSCD-RX433RC1 Receiver Rolling Code 433.92Mhz Sing…
NSCD-RX433RC1
MSRP:
$39.67
$36.06
