BD Loops

BD Loops Direct Burial Loops - 12 to 52 ft loops - 40,60, or 100 ft lead-in

SKU:
bd-direct-burial-loops
MSRP: $109.19 - $193.81
$99.26 - $191.70
Adding to cart… The item has been added
  • Shipping Cost? For the cost of shipping your item please add the item into the shopping cart. Once the part is in the cart fill out address information in the cart under the Shipping area in the Summary section. Our system will then calculate the shipping fee based on your location and the weight of the product. This is all done before you are asked to provide payment information.

We have BD Loops direct burial loops in 12-foot to 52-foot lengths with 40-foot to 100-foot lead-ins at North Shore Commercial Door. These direct burial loops are used for installations under concrete driveways and other concrete layouts, under asphalt, under pavers and in gravel roads. Tie the loop directly to rebar before concrete is poured. Twisted jacketed lead-ins prevent "coil back" from normal twisted lead-in, preventing wasted time untangling lead-in wires. Unlike loops wrapped through PVC, The BD Loops direct burial loop does not have an air pocket. This means fewer repeat service calls due to phantom detections caused by ground vibration. These BD Loops are built with solid 16AWG. To install BD Loops direct burial loop over rebar, simply offset the loop from the rebar pattern and tie it down with the supplied cable ties. Each direct burial loop arrives with an installation kit that includes cable ties for installation on top of rebar, ground stakes for laying the loop in gravel and dirt roads, stickers for easy identification and easy-install instructions. Keep in mind that installing a loop under pavers with a concrete or slurry sub-base requires the use of BD Loops saw-cut loop from NorthShoreCommercialDoor.com.

Product Highlights:

  • 12' to 52' lengths
  • 40' to 100' lead-in wires
  • Kit includes loop, cable ties, ID stickers, installation instructions
  • Install under concrete, asphalt, pavers, gravel roads
  • Built with 16 AWG
  • Twisted-jacket lead-ins prevent "coil back"
  • No air pockets means fewer repair calls
Loops Size Chart

DB-Instructions.pdf