• Usually Ships 4 to 7 Business Days

BEA SuperScan Slave Module ONLY 10SSTSLAVE

  • Usually Ships 4 to 7 Business Days
MSRP: $196.57
(You save $17.87 )
Adding to cart… The item has been added
  • Shipping Cost? For the cost of shipping your item please add the item into the shopping cart. Once the part is in the cart fill out address information in the cart under the Shipping area in the Summary section. Our system will then calculate the shipping fee based on your location and the weight of the product. This is all done before you are asked to provide payment information.


The BEA SuperScan Slave Module ONLY is now available from North Shore Commercial Door. Expand your SuperScan active infrared presence detection system today. Depending on the size of the door leaf and the SuperScan enclosure, each SuperScan can accommodate between 0 & 4 Slave Modules with the SuperScan Master.

The SuperScan Slave Module 10SSTSLAVE Includes: 1 Slave Module ONLY and ribbon connector cable.


Product Highlights:

  • Product Number: 10SSTSLAVE

  • Door mounted presence detector

  • Active infrared

  • For use with swinging, revolving, low energy, high performance and off doors

  • Master with up to 8 slaves monitored or up to 9 slaves non-monitored

  • Field cut housing to desired door widths

  • When coupled with BEA's Bodyguard overhead sensor, SuperScan meets ANSI 156.10 standard for swing doors

  • Relay hold time can be adjusted from .1 to 4.5 seconds

  • Unit can be set to background analysis mode to reduce the chance of non-detection from faulty enveironment situations

Technical Information:

  • Technology: Focused Active Infrared
  • Detection Mode: Presence
  • Measurement of Distance: Triangulation
  • Supply Voltage: 12 to 24 VAC ± 10% / 12 to 24 VDC + 10%
  • Detection Range: 0 in. to 96 in. (0 ft. to 8 ft.)
  • Detection Signal Duration: Infinite Presence Detection
  • Output: Single Relay
    • Maximum Contact Rating: 1 A @ 30 V (resistive)
    • Hold Time: 0.1 to 4.5 Seconds
  • LED Indications:
    • Master: Red LED = Detection
    • Green LED = Active Output
    • Slave: Red LED = Detection
  • Operating Temperature Range: -30˚ F to 140˚ F
  • PCB Dimensions:
    • Master: 10.91 in x 1.5 in
    • Slave: 8.75 in x 1.5 in
  • Max. Number of Slaves:
    • Standard: 9
    • With Monitoring: 8 max.
  • Function Selections:
    • Detection Mode - NO or NC
    • Normal Mode or Background Analysis Mode
  • Response Time: < 50 ms
  • Material: Aluminum, ABS plastic / acrylic
  • Housing Color: Housing Not Included
  • Degree of Protection: IP54