• Usually Ships 4 to 7 Business Days

Vehicle Motion Detector Wand VMD202-250

  • Usually Ships 4 to 7 Business Days
MSRP: $437.13
(You save $39.74 )
Adding to cart… The item has been added
  • Shipping Cost? For the cost of shipping your item please add the item into the shopping cart. Once the part is in the cart fill out address information in the cart under the Shipping area in the Summary section. Our system will then calculate the shipping fee based on your location and the weight of the product. This is all done before you are asked to provide payment information.

The VMD202 is the most advanced single-piece vehicle motion detector on the market today. The probe and its electronics are housed in a slim design that is buried next to a driveway. The VMD202-R Sensitivity Remote Control (sold separately) makes installation and fine-tuning simple.

Program the VMD202 vehicle motion detector’s 10 sensitivity settings with the VMD202-R Sensitivity Remote Control. Simply plug the VMD202-R into the harness to tune the VMD202. The setting is retained in non-volatile memory. The VMD-R can be removed and used for multiple installations, or left in place if tampering is not a concern.

The VMD202 vehicle motion detector accepts a wide range of power inputs. If used in a location without power, one 9V battery will power the VMD202 for six months. The low standby current of 250uA is great for solar power applications.

The VMD202 vehicle motion detector is supplied with a 250-ft. lead, a harness and a jumper.


  • Probe assembly and wire are watertight and direct burial compatible
  • The harness is pre-wired onto the lead wire for easy installation
  • Settings are placed in a non-volatile memory in case of power failure
  • Accepts a wide range of power inputs from 9 – 41 VDC or 6 – 29 VAC
  • Low current consumption of 250uA standby and 12mA activated


  • Item Number: VMD202-250
  • Vehicle Motion Detector by EMX
  • 250-ft. lead