• Non-filled astragal/vinyl-edge closes tight and seals worn-down or uneven floors
Action Industries

Giant Garage Door Bottom Weather Seal Replacement Kit

  • Non-filled astragal/vinyl-edge closes tight and seals worn-down or uneven floors
$43.61 - $90.61
Adding to cart… The item has been added
  • Shipping Cost? For the cost of shipping your item please add the item into the shopping cart. Once the part is in the cart fill out address information in the cart under the Shipping area in the Summary section. Our system will then calculate the shipping fee based on your location and the weight of the product. This is all done before you are asked to provide payment information.

If you have a particularly rough or uneven garage floor, this oversized garage door seal kit lets you still do an effective weather strip. The extra-large vinyl seal with an astragal pattern will work on gaps up to 2.5 inches between the floor and the door bottom. It flexes even at cold temperatures to prevent extreme weather, pests, dirt, leaves and more from entering the structure. It’s an excellent choice for sloped floors and doors that have large side gaps when you close them.
The Giant Garage Door Bottom Seal Kit includes the vinyl seal as well as the matching retainer and mounting screws so you can easily install this seal to any garage door. Kits are available in two lengths (9' and 18') and three thickness options (for 1-3/8", 1-3/4" or 2" wide garage doors).

Kit Includes
9' Kit (fits doors up to 9' wide — can be cut down to size)
    •    (1) 9' Roll of astragal vinyl seal
    •    Aluminum retainer (comes in two (2) 4'6" sections)
    •    Mounting screws

18' Kit (fits doors up to 18' wide — can be cut down to size)
    •    (1) 18' Roll of astragal vinyl seal
    •    Aluminum retainer (comes in four (4) 4'6" sections)
    •    Mounting screws

Choosing Your Kit
    1. Select your garage door width. Choose the 9' kit for doors 9' and below or the 18' kit for doors between 9'-18' wide. If your door is not exactly the size of our kits, the kit can easily be cut down to the size you need. The retainer can be cut with a handsaw and the seal portion can be cut with household scissors.
    2. Select your garage door thickness. We offer three different thicknesses of retainers: 1-3/8", 1-3/4" and 2". See the diagram below for measurements.
If you have questions, contact us by using our live chat, emailing support@northshorecommercialdoor.com, completing our contact form or calling (800) 783-6112.
Kit Part Numbers:
    •    109-0042: 1-3/8” Retainer, 9’ Door Kit
    •    109-0044: 1-3/4” Retainer, 9’ Door Kit
    •    109-0046: 2” Retainer, 9’ Door Kit
    •    109-0043: 1-3/8” Retainer, 18’ Door Kit
    •    109-0045: 1-3/4” Retainer, 18’ Door Kit
    •    109-0047: 2” Retainer, 18’ Door Kit

Installation is easy. Remove the existing seal and retainer from your garage, install the new retainer and then pull the seal through. For tips and more information, check out our Weather Seal Installation Guide and YouTube Video with installation instructions.