EMX LRS-LC Logic Controller (A-B Directionality or Increased Zone)

Take the EMX Loop Replacement System (LRS-C1) Magnetoresistive Vehicle Detector Control Unit to the Next Level with the LRS-LC Logic Interface with 6 selectable functions, including A/B directional logic from North Shore Commercial Door. Now it's easy to connect two stand-alone sensors to expand the detection area. LRS-LC is designed specifically for use with EMX Loop Replacement System Vehicle Detector Control Unit LRS-C1

The LRS Logic Interface or LRS-LC works with LRS-DB Direct Burial (LRS-DB-50 or LRS-DB-100) or CS303-FP (LRS-FP-50 or LRS-FP-100) Flat Pack magnetoresistive sensors. The Logic Interface expands the functionality of the sensors by providing additional features and application-specific logic operations to meet the needs of more demanding installations. The Logic Interface allows one or two sensors to be connected and provides 6 logic functions and 2 separate relay outputs.

Once the sensor(s) has been programmed using the LRS-C1 Control Unit, the Sensor(s) store the settings and operate independently of the Control Unit and can be connected to the Logic Interface. The LRS sensor provides up to a 5ft sensing range in all directions. The LRS-LC Logic Interface allows two (2) sensors to be connected with one output to extend the detection area to 5 x 10ft. Also, A/B directional logic can be selected with an output for each direction of travel as a vehicle passes over two sensors. The status LEDs and durable housing with a standard 11-pin plug-in socket make installation quick and easy. includes black 11-pin socket base DIN rail mount

The LRS-LC Logic Interface was previously known as the CarSense CS303-L Logic Interface and is compatible with other CarSense vehicle detection products by EMX.

Product Highlights:

• Item Number: LRS-LC

• Loop Replacement System Logic Interface by EMX

• For use with the Loop Replacement System (LRS-C1) Magnetoresistive Vehicle Detector Control Unit

• Connects two stand-alone sensors to expand the detection area

• Works with LRS-DB (LRS-DB-50 or LRS-DB-100) Direct Burial or LRS-FP Flat Pack (LRS-FP-50 or LRS-FP-100) Magnetoresistive Sensors by EMX

• Expands the functionality of the sensors

• Provides additional features and application-specific logic operations to meet the needs of more demanding installations

• Logic Interface allows one (1) or two (2) sensors to be connected to one (1) output

• Provides six (6) selectable logic functions and two (2) separate relay outputs

• Once the sensor(s) has been programmed using the CS303-C-1 Control Unit, the sensor(s) store the settings and operate independent of the Control Unit and can be connected to the Logic Interface

• The LRS sensor provides up to a 5ft sensing range in all directions but the LRS-LC extends the detection area to 5 x 10ft

• A/B directional logic can be selected with an output for each direction of travel as a vehicle passes over two sensors

• Status LEDs and durable housing with a standard 11-pin plug-in socket make installation quick and easy

• Includes black 11-pin socket base DIN rail mount

Logic Functions:

• Two relay operation
• A/B directional logic
• Pulse on entry
• Pulse on exit
• Double relay
• Relay 1 only

Technical Information:

• Power Indicator: Green LED

• Detect Indicator: 2x Red LEDs

• Configuration Selector: 10 Position Rotary Switch

• Outputs:
  • Relay 1: SPDT (Form C)
  • Relay 2: SPST (Form A)

• Output Ratings: 1A @ 24 VDC/120 VAC

• Operating Environment:
  • -40° C...82° C
  • -40° F...180° F
  • 0-95% Relative Humidity

• Housing Material: ABS

• Enclosure: IP30

• Power: 12-30 VDC and 24 VAC

• Operating Current (standby/detect):
  • One Sensor Connected: 22/35mA
  • Two Sensors Connected: 33/60mA

• Supply Protection Circuitry: Reverse Polarity and Fuse Protected

• Dimensions: 2.9" (73mm) x 1.2" (38mm) x 3.1" (78mm)

• Weight: 0.25 lbs. (113 g)

• Connector: 11 Pin Male Connector (JEDEC B11-88)

Loopless Magnetoresistive Vehicle Detector

Model	Operating Range	Output	Power	Channel	Housing	Rating	Connection	Detect-on-Stop™	ULTRAMETER™ Sensitivity Display	Installation	Detection Material	Mounting	Detection Mode	Features
Control Unit (required to program sensors)
LRS-C1	—	Relay and discrete	12-30 VDC 24 VAC	Single	ABS	IP30	11 position screw terminal	Yes	Yes	In operator	—	Above ground	Presence and motion	Pulse on entry/exit
Sensor Options
LRS-FP	5 ft. radius (1.5m) 10 ft. dia. (3m)	Discrete	12-30 VDC	Single	Polyamide	IP69K	5 wire	Yes	—	Single saw cut	Ferrous metal	Below ground	Presence and motion	Retains programmed settings
LRS-DB	5 ft. radius (1.5m) 10 ft. dia. (3m)	Discrete	12-30 VDC	Single	PVC	IP69K	5 wire	Yes	—	Core drill, Clamp	Ferrous metal	Above or Below ground	Presence and motion	Retains programmed settings
Accessory Unit
LRS-LC	20 ft. (6m) or more with use of multiple FP or DB	Dual relay	12-30 VDC 24 VAC	Dual	ABS	IP30	11-pin	Yes	—	In operator	—	Above ground	Presence and motion	Provides extended detection, A/B logic and more